Awards & Activities

By the grace of God, I have received these few..

Awards, Grants, and Scholarships

  1. “Beasiswa Pendidikan Pasca Sarjana (BPPS)” from Ditjen Dikti to pursue master degree in ITS Surabaya (2007 – 2009)
  2. “Hibah Buku Pengajaran” from Research Center – Petra Christian University to improve my lecture notes into a published book (2008)
    • Title : “Programmable Logic Controller – Teori, Pemrograman dan Aplikasinya dalam Otomasi Sistem”
  3. “Hibah Seminar Luar Negeri” from DP2M – Dikti and “Student Travel Grant Award” from conference committee to follow ICCAS – SICE 2009 in Fukuoka, Japan (18 – 21 August 2009)
  4. “Hibah Penelitian Dosen Muda” from DP2M – Dikti to finish proposed research (2010)
    • Title : “Implementasi Adaptive Potential Field Behavior Coordination and Compact Q-Learning untuk Sistem Navigasi Autonomous Mobile Robot”
  5. Hibah Seminar Luar Negerifrom DP2M – Dikti to follow The 8th International Conference on Ubiquitous Robot and Ambient Intellgence (URAI 2011) in Incheon, South Korea (23 – 26 November 2011)
  6. “Hibah Penelitian Internal” from LPPM – Petra Christian University to finish proposed research (2011 – 2012)
    • Title : “Patriot : Teleautonomous Mobile Robot untuk Aplikasi Search and Rescue”
  7. “Hibah Penelitian Internal” from LPPM – Petra Christian University to finish proposed research (2012 – 2013)
    • Title : “Prototipe Robot Patroli dengan Kinect sebagai Pendeteksi Postur Jatuh Manusia”
  8. “Penelitian Hibah Bersaing” from DP2M – Dikti to finish proposed research (2013 – 2014)
    • Title : “Semi-Autonomous Telepresence Robot” (contributing in the proposal submission stage)
  9. “Beasiswa Pendidikan Pascasarjana – Luar Negeri” from Ditjen Dikti to pursue Ph.D. degree in Computer Science and Engineering, UNSW Australia (2013 – now)
  10. “Travel Support Scholarship” from IEEE to participate in the IEEE-RAS Response Robotics Summer School, 26 – 31 September 2014 in Perth, Australia

Other activities

2006

  • Coordinator of Electrical Fiesta 3  (high school student competition on robotics using LEGO robot)
  • Member of Grant Proposal “Program Hibah Kompetisi – A2” Team (succeed to reach the grant)
  • Trainer of “PLC TSX Micro 37/21 Schneider Progamming – Basic Level” (July)

2007

  • Member of Curriculum Team in Electrical Engineering Department (EED), Petra Christian University (PCU)
  • Supervisor of students team on “National PLC Programming Competition” in ITB (2nd winner)
  • Trainer of “PLC TSX Micro 37/21 Schneider Progamming – Basic Level” (June, August)

2008

  • Coordinator of Electrical Fiesta 5
  • Trainer of “PLC Omron Programming – Basic Level” (January)

2009

  • Coordinator of Electrical Fiesta 6
  • Member of Accreditation Team in Electrical Engineering Department (EED), PCU
  • Participant of “Workshop KBK (Kurikulum Berbasis Kompetensi) : Evaluasi dan Penilaian” which is held by EED, PCU (September)
  • Trainer of “SCADA Programming using Wonderware InTouch 10.0 – Basic Level” (October)
  • Participant of “Wonderware InTouch Programming” Training which is held by PT. Trimaxindo Adimitra (December)
  • Get married. Yay!

2010

  • Supervisor of students team on “National PLC Programming Competition” in ITB
  • Coordinator of Electrical Fiesta 7
  • Member of Curriculum, Accreditation, Robotic Course (for high school student)  Team in EED PCU
  • Trainer of “SCADA Programming using Wonderware InTouch 10.0 – Basic Level” (March, June, July, August, December)
  • Trainer of “PLC Siemens S7 200 – Basic Level” (December)

2011

  • Coordinator of Electrical Fiesta 8
  • Member of Curriculum, Accreditation, Robotic Course (for high school student)  Team in EED, PCU
  • Local Chair for World Congress IFSA -AFSS 2011 (http://ifsa2011.eepis-its.edu/)
  • Trainer of “SCADA Programming using Wonderware InTouch 10.0 – Basic Level”, “PLC Siemens S7 200 – Basic Level”, “Zelio Smart Relay – Basic Level”
  • Project “OPC Data Logging in PGN Jakarta”

2012

  • Member of Electrical Fiesta 9, Curriculum, Department Accreditation, Robotic Course (for high school student)  Team in EED, PCU
  • Member of Institution Accreditation team in PCU
  • Trainer of “SCADA Programming using Wonderware InTouch 10.0 – Basic Level”, “PLC Siemens S7 200 – Basic Level”, “PLC Siemens S7 200 – Intermediate Level” at IATC, PCU
  • Giving in house training about “SCADA Programming using Wonderware InTouch 10.0 – Basic Level” at SMKN 1 Bontang
  • Being a father 🙂

2013

  • Member of Electrical Fiesta 10, Curriculum, Department Accreditation, Robotic Course (for high school student)  Team in EED, PCU
  • Member of Institution Accreditation team in PCU (resulted in A grade)
  • Trainer of “SCADA Programming using Wonderware InTouch 10.0 – Basic Level”, “SCADA Programming using Wonderware InTouch 10.0 – Intermediate Level”, “PLC Siemens S7 200 – Basic Level” at IATC, PCU
  • Giving 2nd in house training about “SCADA Programming using Wonderware InTouch 10.0 – Intermediate Level” at SMKN 1 Bontang
  • Pursuing Ph.D. degree at Computer Science Engineering, UNSW Australia

2014

  • Attending several seminars and workshops related with my Ph.D. study:
    • Workshop “Writing Clearly and Succinctly” (Faculty of Engineering – UNSW)
    • Seminar “Academic Writing for Postgraduate ESL Students” (Learning Centre – UNSW)
    • Seminar “Literature Review” (Learning Centre – UNSW)
    • Seminar “Methodologies and Tools for Scientific Research in
      Computer Science and Engineering” (IEEE – UNSW Student Chapter)
  • Laboratory demonstrator for Introduction to Engineering Design and Innovation (ENGG 1000) course at Faculty of Engineering, UNSW
  • Participant of IEEE-RAS Response Robotics Summer School in Perth, Australia

2015

  • Mentor and laboratory demonstrator for Introduction to Engineering Design and Innovation (ENGG 1000) course at Faculty of Engineering, UNSW
  • Attending RoboCup 2015 to demonstrate Emu Mini 2, a 3D printed mini rescue robot, in Hefei, China
  • Teaching robotics to elementary school children using Edison robot at EdX Academy

2016

  • Mentor and laboratory demonstrator for Introduction to Engineering Design and Innovation (ENGG 1000) course at Faculty of Engineering, UNSW
  • Tutor for Machine Learning and Data Mining (COMP 9417) course at School of Computer Science and Engineering, UNSW
  • Subreviewer for IJCAI 2016 conference